A Guide for Choosing Between Plumbing Pipe Types
Is your pipe leaking? There are many options for choosing the correct type of plumbing pipe when fixing a leaky pipe. The best choice can keep your home's water flowing without any backlog. The wrong choice could lead to a number of problems.
In a commercial or residential building, you can use many different types and sizes of plumbing pipes. There are several types of plumbing pipe options, including PVC and copper. Depending on where they are used and where they need installation, the choice between one or two is made. Galvanized piping and brass can be used to make other types.
This article will describe the different types, and their respective uses. There are pros and disadvantages to each type. As a homeowner, you should be aware of which ones are best.
What are the different types of plumbing pipes?
Here's some information for those who are in the market for new or replacement plumbing pipes. This knowledge will enable you to make an informed choice for your home.
Copper Plumbing Pipes
Copper pipes are probably the most commonly used plumbing pipes. They are reliable and durable. They can be cleaned easily and used for hot and cool water. Copper pipes are not prone to leakage and will be securely fitted. Copper piping is also non-polluting for the water that it runs through. This type is heat-tolerant and can be reused.
Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our Staff Ask Our StaffCopper pipes have one major drawback: the high price. One hundred feet can be purchased in straight copper pipe for around $285
These pipes are soldered together and could need additional fittings. This is why you will need a plumber who's experienced in soldering. You should also note that copper pipes could have been installed with lead solder if they are older.
Galvanized Steel Plumbing Pipes
Galvanized pipes made of steel aren't often used, despite their strength. The pipe ends are threaded and screwn into each other using connecting joints.
Galvanized steel tubes have one drawback: They are heavy, making it difficult to work.
A zinc coating also makes them vulnerable to internal rusting. Furthermore, lines can clog and cause reduced water pressure.
Lead can be released into the drinking water if the pipes get corroded.
Cast Iron Plumbing Pipes
Cast iron piping can also be found in older properties. This type of piping, despite its aged appearance, is still viable and can last until it rusts completely. Cast iron pipes are used to line sewers and are more sturdy than other types. It can be either bell-andspigot or threaded. The more expensive threaded joints are the ones that cost more.
The smallest diameter for this pipe is 4 inches. Cast iron is extremely heavy and needs to be supported when the joint is being put together.
Comments
Post a Comment